Tag Archives: Valencia

by

New Article from National Geographic: Ansel Adams and Peter Essick

National Geographic has published an article about Ansel Adams in its October issue – but it’s not like any article in this genre that you’ve ever seen. It includes a portfolio by renowned photographer Peter Essick, paying tribute to the man who inspired generations, and thousands of photographers.

An excerpt:

“A portfolio by Peter Essick pays tribute to Ansel Adams and the craggy California wilderness named in his honor”

“On his first trip to the Sierra Nevada, in June of 1916, Ansel Adams went armed with a camera—a Kodak No. 1 Brownie—and started shooting. “I expect to be broke if I keep up the rate I am taking pictures,” the budding 14-year-old photographer wrote to his Aunt Mary in San Francisco that summer. “I have taken 30 already.”

He kept shooting for almost seven decades, until his death at age 82 in 1984, by which time he had become a world-famous photographer and a powerful voice for wilderness. Although he traveled far and wide, he returned again and again to the Sierra—”a noble gesture of the earth,” in his phrase—for the adventure, artistic inspiration, friendship, and solace he found among its jagged granite peaks, snow-swept passes, and brooding skies. His uncompromising portrayal of these subjects still draws pilgrims to the wilderness that bears his name, deep in the heart of the High Sierra, in hopes of seeing what Ansel Adams saw there.”

All images and excerpt above are courtesy of National Geographic. A link to the web article is provided below.

National Geographic – Ansel Adams / Ansel Adams Wilderness

by

“AUTUMN” Alphabet Is Calling in New Phoozl Alphabetography Photo Challenge

Charlottesville, Virginia, USA – September 26, 2011 — Photo-games site Phoozl.com today launched the Autumn edition of the “Alphabetography Photo Challenge: the Four Seasons” contest on Facebook. This unique competition — which challenges photo enthusiasts worldwide to find or take and then submit (for free) photos based on a two-part theme of the season (“Autumn”) and the specific letters of the seasons (“A-U-T-U-M-N”) — started on September 26 and runs for six weeks to its conclusion on November 6, 2011. You can find the contest on Facebook at: http://apps.facebook.com/alphabetography

(requires a Facebook account and “allowing” the Request for Permission screen)

“We’re super-excited about the new AUTUMN Challenge,” says Alphabetography creator Harald Johnson. “Our first three seasons were great, but this promises to be the best season yet! We’re again awarding 11 Prize Winners with some cool prizes from gift cards to books of value to photo enthusiasts. We are all about offering a safe place for people to share their photos in a fun and unique way.”

A Unique Alphabet Photo Contest Concept

During each season’s contest (using “AUTUMN” as the example), photo enthusiasts submit photos that apply or relate to the current letter that’s in play. So during the “A” Letter Period, for instance, participants upload photos that are associated with (whose subject matter includes in the Title) a word starting with the letter “A” (examples: Autumn, Ambiance, Arachnid, Attractive). When the gameplay moves to “U”, “U” photos are submitted. And so on through the six letters of the word “A-U-T-U-M-N” with each letter active for one week only. Entrants are allowed up to 5 submissions per letter maximum, and all submissions are free. Photos can be submitted via Facebook or photo-sharing sites, or uploaded from local computers or mobile devices. Participants can even join the contest late as there are six Letter Periods in this season’s Challenge, so there are multiple chances to enter.

Contest participants need only a Facebook account to enter, and they must be at least 18 years old. Photo submissions are acceptable from anywhere in the world, and there are no restrictions on when photos are taken or if they have been manipulated.

Voting, Judging, Galleries, and Prizes

Alphabetography includes photo galleries and public voting, and the Top 10 vote-getting photos for each letter move to the Judging Phase where a panel of three professional photographers – Daniel J. Cox, Bruce Frazier, Andy Katz for this contest — judge and score the 60 Finalist Photos based on published criteria.

The AUTUMN 2011 Alphabetography Photo Challenge costs nothing to enter but is offering (to 11 different winners) prizes sponsored by such companies as: Blurb, Datacolor, Frame Destination, SanDisk, Course Technology PTR, and Phoozl. Winners are selected in four categories: (1) Total Overall Scores, (2) Best Letter, (3) Voters #1, and (4) Phoozl Awards (“Most Phun Photos”).

The full “SUMMER” Winners’ List (with photos) is available for viewing on Phoozl.com:

http://www.phoozl.com/article-34-Summer-Alphabetography-Photo-Challenge-Winners-Announced.html

by

New iPad app from Nik: Snapseed Image Editor

I had a chance to download Snapseed from the App store this morning. It’s an impressive, nicely-featured app for image editing etc. that fits right in the world of the iPad. It was launched by Nik Software a short time ago.

I like its intuitive interface, range of controls (including selective adjustments), and the incredible ease of exporting images to email, social networking sites, etc.

My carry-around iPad kit now consists of a Canon G10, photo connector, iPad with Snapseed! What a combo!

www.niksoftware.com

and….

go to the Mac App store via the icon on yor iPad (installation is dead simple) or go to the App store on Apple’s site, etc.

It’s 4.99, and a steal at that price. Go for it!

LAST: check out the WORKSHOPS tab above for upcoming sessions for photographers, coming up on June 29!

by

Build a Killer Portfolio, Part 2

Just posted an update on the GuruShots blog –

Here’s a snip:

“Now that you’ve created a “collection” of images, it’s time to make some of the big decisions. You may have created a collection of wildlife images, street photography, still life, documentary photos, or others. Within these groupings, you may have images that are more representational (i.e., more realistic than interpretive), design oriented, impressionistic, and the like……”

you can find it here.

by

Nik Silver Efex Pro 2: Review and Basic Workflow

by David Saffir

Whether you’re considering using SEP2 for the first time, or upgrading, you’ll find that the software is well-designed – it has an intuitive interface, good balance between presets and customization, improved editing options, runs faster, and produces excellent image quality.

Some might say that the presets and other tools available in programs like Lightroom or Aperture are sufficient to create good black and white images – but I can’t agree that they are the best choice.

The high level of control and customization available in Silver Efex Pro 2 (SEP2) make this an excellent tool for serious photographers. And even if you’re only occasionally converting a color image to black and white, you’ll find the software to be well worth the investment in time and money.

Here’s the original color image that I worked on for this article:

Highlights

The opening screen, launched from CS5. Note that SEP2 always starts out applying the default “Normal” preset (outlined in orange) – and in this case the image looks a bit dark to me. That’s going to change, of course. (click on any screen shot to enlarge)

Silver Efex Pro 2 has a great lineup of pre-sets – one click on a pre-set converts your image into your selected black and white “look”. (left side of screen shot).

There are some new ones, and all have been organized into categories for easy reference. You can use presets for a one-click conversion, as a starting point for further edits and adjustments. You can also save your own adjustments in a custom preset.

Brightness – previously had one slider adjustment. Brightness can now be adjusted in highlights, midtones, and shadows. A “dynamic brightness” adjustment has been added (the Dynamic Brightness slider automatically adapts the brightness applied to each area differently – more detail later in this review).

Contrast – Now provides three sliders: Amplify Whites, Amplify Blacks, and Soft Contrast.

Structure adjustment (quoting Nik Software: “Increasing contrast within the objects without affecting the edges of each object. The result is the increase of apparent detail throughout the image without unwanted artifacts”.): This has been expanded/upgraded – adjustments can be made highlights, midtones, and shadows. There’s also a new adjustment for “fine structure”.

Selective adjustments: uses Control Points to make local changes to brightness, contrast, structure, amplify whites, amplify blacks, fine structure, and selective colorization.

Color Filters – you can apply color filters to the image, which are the digital equivalent of using a similar filter on-camera.

Film Types: provides 18 presets for applying the “look” of a particular black and white film. There are also adjustments for grain, color sensitivity, and a levels and curves adjustment.

Finishing Adjustments: toning/split toning, vignette, image borders, and burn edges. The toning tool set is particularly sophisticated, and even includes controls for things like silver toning.

Loupe, Histogram, and Zone System tools - more on these later, including the Zone System.

History Browser – records all of your adjustments, step by step. Similar to Photoshop. You can roll back and forth between steps. Very useful tool and a great improvement.

_______________

Workflow

This section provides a more detailed review of features, and an example of workflow, using SEP2. There’s more than one way to approach image editing – its relatively easy to work through your options and get the best result.

Most reviewers jump right into using the software, but I’d like to suggest a different starting point: convert your first layer in Photoshop into a Smart Object. Smart Objects “remember” your adjustments in SEP2.

Once you convert the layer, you can adjust via SEP2, close it, and later click on the Smart Object – this will re-open SEP2 where you left off, and remember all adjustments from your earlier session. Very efficient and powerful.

Here’s how you convert a layer to a Smart Object in Photoshop: Layer>Smart Objects>Convert to Smart Object:

Note: I’ve inserted a second layers palette into this illustration. The palette marked “1” shows a standard background layer. The palette marked “2” shows a background layer converted to a normal layer, and then to a Smart Object. A Smart Object is identified by the square icon lower right in the layer thumbnail (see arrow).

To launch SEP2 from Photoshop (assuming you’ve installed it), go Filter>Nik Software>Silver Efex Pro 2.
Here’s the opening screen again.

(click on any screen shot to enlarge)

The opening screen is organized into three columns. On the left, the column shows the presets I mentioned earlier in this article. The red rectangle includes a toggle button to hide the presets column, and a second button to reveal it.

There are many presets. They range from “normal” to some impressive special effects. A single click on any preview thumbnail temporarily applies the pre-set adjustments to the image. They are not finalized until you click OK at bottom right.

I frequently test a few presets at the beginning of an editing session to see if I can shorten my work cycle to a finished image, or at least get to a starting point for customized adjustments. Inside the green rectangle, the first button shows a single image view. The second button displays a red line down the middle to show “before” on the left and “after” on the right as a split preview.

You can move the line where you wish, or change the orientation of the two previews. The third button creates two smaller images showing a “before” and “after” side-by-side. In my own workflow, I usually use the line tool. It’s also possible to zoom in and out for closer inspection.

The third column, on the right, has a wide range of image adjustment and editing tools.

Global Adjustments

I generally make global, or image-wide adjustments first, and work on details second.

I may go to the Color Filter or the Film Types first. These are similar to on-camera filters we are all familiar with. For example, the red filter is a good choice with this model’s skin tones. Note that the filter can be adjusted for intensity and hue – click on the Details triangle icon and the submenus will appear:

Red filter applied, before/after view.

These are non-destructive edits – they are not applied to the image until I press the “OK button. If I find that they are not fitting into the workflow at the beginning, I’ll probably return to them later on.

Film types

Another global adjustment. The film types tool provides 18 different black and white film types that do a remarkable job of emulating some of the more popular black and white films. If you mouse over them you’ll see a preview of its effects.

You have a couple of options here. Like the presets provided in the left hand column of the software screen, you can use these as a quick path to a finished, or nearly finished image. In my workflow, I usually use them as a starting point for further editing.

Note the Grain adjustment panel, right under the film type drop-down. This is a highly flexible adjustment, and it does an excellent job of emulating actual film grain – it is very natural in appearance. Left side shows “before”. I’ve used a fairly intense setting for demo purposes – you have complete control on-screen.

If you select a film type, you’ll see changes in both the Sensitivity and Levels/Curves panels. These are adjustments in the response of the “film” to the color in the underlying, original image. (Also note the change in the grain adjustments, which are part of the “look” of the film selected.)

Both of these can be adjusted further to suit your needs. One can adjust Curves and Levels as well – in fact, one could say that there is rarely a reason to leave SEP2 and return to Photoshop for adjustments.

I usually move through the next part of workflow in the order provided in the global adjustments panels.
Brightness/Contrast/Structure adjustments. Note that each adjustment slider can be expanded by clicking on the triangle next to each tool name:

This division is a welcome improvement. For each segment:

Brightness

Divided into highlights, midtones, and shadows. This is more or less self-explanatory. There is a fourth adjustment, Dynamic Brightness. Quoting Nik Software “intelligently applying different brightness values to different areas of the image. Moving the slider to the left will darken the image overall, while keeping highlight detail. Moving the slider to the right will brighten the image overall, while keeping shadow detail”.

Contrast

Amplify Whites and Blacks – moving the whites slider to the right selectively increases tonal values of brighter areas, which can be adjusted without blowing out highlights. Moving the blacks slider does the same for tonal values in darker areas.

The Soft Contrast tool is one of my favorites. It quickly applies a “softer” look to the image – when I see the change, I think “smooth” – in terms of overall contrast and transition areas. In this case, I’ve applied a Soft Contrast adjustment at 25%. “Before” view to the left of the red line.

Structure

The structure adjustment is a pretty unique tool. Quoting Nik: “(Increases) contrast within the objects without affecting the edges of each object. The result is the increase of apparent detail throughout the image without unwanted artifacts”. An example of a structure adjustment in the shadows area (I made a modest adjustment. Note the structure slider. “Before” view is to the left. You can click on  screen shot to enlarge)

Fine Structure is pretty self-explanatory – it works on the smaller details in the image.

History Browser

This is a good time to introduce you to the new History Browser. Move the slider up and down your editing steps to either change your workflow, or review the impact of changes step-by-step. This tool is toggled on and off using the third button from the left in the panel (button outlined in red, arrow points to slider):

Note that unlike Photoshop you can’t delete an individual step from the middle of an editing stream and leave the remainder intact.

Selective Adjustments

Nik Software created the Control Point (they also refer to this as U-Point technology). Control points are highly adjustable tools that provide brightness, contrast, structure, amplify white, amplify black, fine structure, and selective colorization.

One creates a control point by first clicking on the “Add Control Point” icon. Then, you click again on the part of the image you want to adjust.

The size of the adjustment, or “area of influence”, is provided in the first slider on the control point:

Note that the Control Point is a very smart tool: it analyzes the area it is controlling, using the place where you first clicked (orange dot) as its reference. Adjustments made to the control point will generally affect only similar tones, textures, etc within the circle of influence. Adjustments made here would have minimal effect on the model’s hair.

Control points can be placed at will in the image. You can also place multiple control points – these can be controlled individually, or they can be grouped. When grouped, an adjustment made to one affects all in the group. They can also be adjusted from the right hand control panel, turned on and off, and more.

Control points are very sophisticated tools. There are many more ways to mix and match them.
_________________________

Finishing Adjustments

Nik provides a number of tools for enhancing and finishing your image.

These include:

Toning/Split Toning
Silver Toning
Paper Toning
Vignette
Burn Edges
Image Borders

One of my favorites among these are the toning tools.

If you click on the toning drop down you’ll see something like the screen shot below. When you move your mouse pointer over each one you’ll see a live preview on screen.

Note that I’ve selected sepia toning; there are many others to choose from. Note the inclusion of cyanotype and ambrotype adjustments. The strength of the toning is adjustable.

If you choose silver toning, you’ll see color in parts of the image that would, if this were a darkroom print, have silver on them. White areas obviously do not. It’s a different look: (remember – you can enlarge any screen shot by clicking on it)

Paper hue and toning are more or less self-explanatory.

The vignette tool is very flexible. There are presets available through the drop down, you can control the intensity via a slider control, you can adapt the vignette from a circle to a rectangle, and adjust its size.

A burn edges tool is provided. There are presets available, you can apply the effect to 1, 2, 3, or all four edges, control the amount, shape, and size.

(click on any screen shot to enlarge)
detail of the breakout box:

The image borders tool is one of my favorites. Presets are provided in the drop down menu, and you can adjust size, spread, and whether the effect is “clean” or “rough”. There’s also a “vary border” tool which provides nearly random variations on a set of adjustments.

I’ve provided a split-screen view here so you can see one pair of options. (I previously applied one effect). The right side of the screen shows an image border resulting from maxing out the sliders to the right.

Last but not least is the part of the palette column that provides a loupe viewer, a histogram, and a zone map, or zone system- based selector.

The first two are pretty basic, so I’ll move on to the zone system selector. If you mouse over a particular step (here I’ve hovered over step 3) the corresponding areas in the image will be highlighted by red shading. (see the zone boxes in the red outline lower right)  You can also click on these and mark more than one zone.

This is useful if you want a particular area of your image to be in a particular zone – identify the zone, and make global or Selective Adjustments to suit.

Wrap-Up

When I drafted this article in Word, it stretched to almost 20 pages. That’s pretty unusual – I still feel like I scratched the surface and a bit more – and you have to ask, how could that be?

Silver Efex Pro 2 is NOT a complicated application – but it is truly fully-featured. It incorporates the best of both worlds – darkroom and digital – and the results can be outstanding. The folks at Nik come from a variety of backgrounds, including film and darkroom processing, hard-core digital, world-class lighting, and more. The variety of tools available, and their accessibility, make it a “must have” for those of us who are interested in digital black and white photography.

The results you can get from this application will speak for themselves. Get the free trial, and put it through your toughest challenges.

For more info, go to Nik Silver Efex Pro.

DISCOUNT: If you decide to purchase Nik Silver Efex Pro2 or any Nik software product, including upgrades, use this code on the order page: DSAFFIR. You’ll get a 15% discount.

For updates on my workshops use this link.

_________________________________

Disclosure: I have been a beta tester for Nik Software. I did not receive compensation for this article.

by

Tips for Photographing Wildflowers

Tips for Photographing Wildflowers
Posted on the Pro Photo Blog by HP – written by David Saffir

Every spring, photographers eagerly await the start of wildflower season. Although the wildflower turnout is nearly impossible to predict, photographers always have high hopes for a good bloom. From the desert to the sea, the possibilities are almost endless.

Finding the Right Time and Place

Wildflowers can be found almost anywhere during the spring. A good place to start looking is by taking your camera to popular local hiking trails. But if you would like to shoot different varieties of wildflowers than those found locally, you’ll need to do some research before you plan a trip.

more….

by

Review, Nik Silver Efex Pro Software and Creating Black and White Images

I recently got the latest version of Silver Efex Pro, created by Nik Software. I’ve been using it as a plug-in in Photoshop. I’ve found it to be a feature-rich, effective tool in creating pleasing, customized black and white images from color digital originals.

In this post I’ll cover some highlights regarding the software – for more details, see the Nik website, which has training videos and more.

One aspect of the software’s flexibility is that one can use a wide range of presets – or completely customize the conversion. For example, Nik includes presets for 18 black and white film types, which adjust the image in line with the tonal qualities, contrast, grain, etc of each option.

One can also start with a preset, customize it, and save it as a personal set of adjustments. I have found this to be particularly useful when converting several images from the same series.

Here is an image I’ve been working on recently, in a screen shot from Photoshop. The photograph was taken in Vancouver, Oregon using a Hasselblad H-series camera and a Phase One back – captured in color, of course. I’m using one of my edited files, and I’ve turned off all the adjustment and conversion layers to show you the original.

The Old Barn

I thought of converting it to black and white for several reasons – gray skies, pretty much one color for the structure, and to emphasize the age and condition of the barn.

The Silver Efex plug in lives in the Photoshop Filters menu. The first screen looks like this (I’ve turned preview off so you can see the image in color):

The dialogue box is divided into three main panels: on the left, you’ll see the conversion presets. These can be used to make a conversion in one step, ranging from neutral/conservative, to intense. Conversions for ambrotype and cyanotype are also included.

Overview

In the middle is the preview pane. On the right hand side is a series of control panels that nest in a column to save space. A left click on a bar opens that set of controls for viewing. Controls for brightness, contrast, and structure are placed at the top of the column. (structure refers to the appearance of fine detail).

Top Control Panel

These adjustment controls can be used globally in the image – or, one can use a Control Point (illustrated below) for localized adjustments. A control point can be placed anywhere in the image by clicking the Add Control Point button and left clicking in the image. It provides sliders for controlling size, brightness, contrast, and structure – note the circle around the control point.

Control Point

Multiple control points may be used. Individual control points can be turned on and off.

One of the more interesting features of Silver Efex pro is located in the Color Filter panel. There are five color filters, and these may be used as one would use an analog filter on-camera. There are sliders provided to adjust the hue and strength of the filter.

Silver Efex Pro Filters

Another feature I find very useful is the Film Types control panel. This includes 18 pre-sets for well-known black and white film types. Left clicking on the drop-down reveals the film types, and hovering the mouse pointer over an individual item activates a preview of the effect.

Film Type Presets

Interestingly, an adjustable tone curve panel is provided, so customization is possible. This is similar to the Curves adjustment tool in Photoshop. ”Film grain” can also be added and adjusted here.

Film Curve

The stylizing bar contains controls for vignette, toning, and burning edges. Each has fine-tuning controls that allow wide latitude in adjustment.

The Loupe panel provides a magnified view of the image – hover the mouse pointer over the area you want to see. The grey step wedge you see underneath the Loupe viewing area will help in identifying areas of the image that are in each tonal zone (1-10). Left clicking on one will cause that tonal area to be highlighted in the preview.

Loupe Panel

When you’re done with your adjustments you have the choice of having the conversion applied to the current layer, or having Silver Efex Pro create a new layer for you.

One pleasant surprise is that Silver Efex Pro can be used with Photoshop Smart Filters. This means that one can make the conversion, and if needed, go back and readjust.

Once the conversion was complete, the dialogue closed and I was returned to Photoshop. I added a curves adjustment layer for midtone contrast, and I was finished.

I want to point out that Nik also provides an option in the Silver Efex dialogue for one to brush the effect on selectively, rather than apply it globally to the image. This is, of course, useful in creating special effects, selective color/black and white images, etc.

I like the final result. This has the appearance of a continuous-tone image, with good tonal range, smooth transitions, crisp lines of contrast, good detail, and it is completely neutral.

Old Barn

NEW WORKSHOP ON NIK SILVER EFEX PRO COMING UP, JANUARY 2011 CLICK FOR DETAILS!

Silver Efex Pro can also be used with Adobe Lightroom and Apple’s Aperture. SPECIAL NOTE: Special Nik software coupon code “dsaffir” just for my blog readers.
Go to niksoftware.com.